EasyTs Pharma
+ bench for leak test

,

Main Strengths
• Compact design
• Modular system for different containers with fast size change (one minute only)
• Immediate OK/NOK output
• Sensibility compatible with microorganism dimensions (some micron)
• Minimal energy transferred to the product (less than 0,08J)
• Not specific skills needed
• Siemens PLC and display
• Fully safe condition for the operator
• Stainless steel and FDA approved plastic material
• Applicable also to liquids with low conductivity as distilled water

EasyTS

bench for leak test

The EasyTS leak detection bench is the best solution for a reliable detection of microcracks or pinholes.affecting the sterility of containers.

Functioning
Easy TS allows the operators to perform leak test of all kinds of containers filled with liquid products (glass ampoules and vials, plastic bottles, infusion bags, BFS strips and bottles). It can be used for off-line test of samples or, with few units, it is possible to inspect 100% of small-medium production. Operator puts the container inside the bench and presses the pushbutton: the bench automatically executes the test (in 0,1 sec) and turns on a green/red lamp to indicate the OK/NOK result.
Once set up, it doesn’t require any calibration nor specific skills to be used. Parameters are saved in recipes; numerical and graphic results are also visualized on the display.

Detection method
The bench applies the well known method of high voltage: if any leak is present, a discharge current will flow through the pinhole into the container and will be measured by the system.

Technical Specifications
Dimensions (LxWxH)
400 x 360 x 650 mm
Weight
15 Kg
Electrical / Power
230V   50/60 Hz   1 Ph   250W
Test voltage
Up to 40 KVolt
Containers material
Glass, PE, PET, PPE
Containers types
Vials, ampoules, BFS strips, infusion plastic bags,
BFS bottles
Containers dimensions
1 to 2500 ml
Sensibility
about 1 micron
Product conductivity
≥ 2,5 µSiemens/cm

Donwload a PDF of this machine

The EasyTS leak detection bench is the best solution for a reliable detection of microcracks or pinholes.affecting the sterility of containers.

EasyTs Beverage
+ device for off line leak test

,

Main Strengths
• Compact design
• Non destructive control
• Exhaustive method
• Precise and accurate output
• Easy and fast setuP
• Easy setup
• Configurable for different neck finish
• Not specific skills needed
(thought as production and QC tool)
• Detection threshold compatible
with microorganism dimensions
• Very short measuring time
• Fully safe condition for the operator

EasyTS

device for off line leak test

Easy TS is a compact and robust device suitable for execution of sampling test; it is specifically designed to be installed on board of filling lines and to be used by fillers.

Functioning
Once set up, Easy TS doesn’t require any calibration nor specific skills to be used; qualitative and objective OK/NOK output coupled with a very short analysis time, make the Easy TS indispensable for every filling machine in order to secure and control one of the major critical process point: closure tightness. The initial set up aims to customize recipes and electrode shapes to secure a perfect discrimination capability tailored on the products filled into the bottles.

Detection method
The bench applies the well known method of high voltage: if any leak is present, a discharge current will flow through the pinhole into the container and will be measured by the system.

Technical Specifications
Dimensions (LxWxH)
400 x 360 x 650 mm
Weight
15 Kg
Electrical / Power
230V   50/60 Hz   1 Ph   250W
Bottle material
PET – HDPE – PP – LDPE
Bottle height
up to 360 mm
Closure Ø
25 ÷ 50 mm
Closure shape
Flat, Sport, Thumb up
Sensibility
about 1 micron
Product filled
Black tea, Juices…
Conductivity
≥ 100 µSiemens/cm

Donwload a PDF of this machine

Easy TS is a compact and robust device suitable for execution of sampling test; it is specifically designed to be installed on board of filling lines and to be used by fillers